Buckaroos, Inc.
9635 Park Davis Drive
Indianapolis, Indiana 46235
Toll Free: 800-969-3113 • Phone: 317-899-9100 • Fax: 317-899-0775
Email: info@buckaroos.com • Website: www.buckaroos.com
All Categories > Pipe Insulation Supports > Fiber Glass Blocks > Item # FG2122129  


Item # FG2122129, Fiber Glass Blocks
List Price QUOTE

  • Perfect insulation support for mechanical piping systems.
  • Made of 20 PCF molded fiber glass offer greater thermal conductivity and high service temperature range.
  • Service temperature of up to 450°.






Specifications  · Technical Data  · Guide Specifications  · Recommended Installation Instructions

Specifications

Support Sizes
2 1/2 x 2 1/2 x 9 in

Stock Item

 View
No

Pieces per Box
20


Technical Data

Service Temperature
-120 to +450 ºF

Thermal Conductivity
K Factor is .30 (stable and non-deteriorating)

Compressive Strength at 30 psi
Nominal 5% deflection

Compressive Strength at 80 psi
Nominal 10% deflection

Water Absorption, by Volume
.02%, 96 hours at 120°F, 96% RH

Density
20 lb/ft³

Corrosion
Does not corrode or cause corrosion

Safety
Non-combustible

Shrinkage
None. Dimensionally stable.

Alkalinity
pH9


Guide Specifications
Install the Buckaroo Molded Fiberglass Block in combination with the Buckaroo Pipe Insulation Shield whenever pipe insulation passes through a hanger location.

The thickness of the Buckaroo Molded Fiberglass Block should be the same as the thickness of the insulation.


Recommended Installation Instructions
Place the Buckaroo Fiberglass Blocks between the bottom of the pipe and the Buckaroo Pipe Insulation Shield exactly at the hanger location. The thickness of the Fiberglass Block must be the same as the thickness of the insulation.

To install a Fiberglass Block, first remove a section of the insulation equal to the size of the Fiberglass Block. Then insert the Fiberglass Block in that location.